MODBUS TEMP CONTROL HEAT ONLY SSR
90A
200A
901 MODEL / HEATSINK | 90 AMP SSR LOAD CURRENT @ 40°C |
---|---|
B-48 | 36 Amp |
B-72 | 60 Amp |
A-100 | 65 Amp |
A-190 Heat Sink without Fan | 36 A x 3 = 108 Amp |
A-190 Heat Sink with Fan | 40 A x 3 = 120 Amp |
UNI 901 MOD TC ONF 60 90 485 CU2 CT60 JK HO
Temp Controller with Normal PID+Fuzzy Control+
2 Degree of freedom+Adaptive Control (Heat Only)
Interact to HMI or PLC on Modbus RTU 485 protocol
Select J or K TC (RTD optional), CJC in the SSR
247 nos. HEX address selection on SSR by 2 switch
Baud rate: 9600/19200/57600/115200 bps by switch
Parity On/Off, Even/Odd, Stop bit 1/2 by switch
Ext. CT for Current & Load failure indication
O/p 24-600VAC/47-63Hz/ 90 Amp/ Zero cross over
All input isolated, RS485 as per IEC 61000 STD.
UNI 901 MOD TC ONF 60 90 485 CU2 CT60 JK HO
901 MODEL / HEATSINK | 200 AMP SSR LOAD CURRENT @ 40°C |
---|---|
A-100 | 80 Amp |
A-190 Heat Sink without Fan | 44 A x 3 = 132 Amp |
A-190 Heat Sink with Fan | 52 A x 3 = 156 Amp |
UNI 901 MOD TC ONF 60 200 485 CU2 CT60 JK HO
Temp Controller with Normal PID+Fuzzy Control+
2 Degree of freedom+Adaptive Control (Heat Only)
Interact to HMI or PLC on Modbus RTU 485 protocol
Select J or K TC (RTD optional), CJC in the SSR
247 nos. HEX address selection on SSR by 2 switch
Baud rate: 9600/19200/57600/115200 bps by switch
Parity On/Off, Even/Odd, Stop bit 1/2 by switch
Ext. CT for Current & Load failure indication
O/p 24-600VAC/47-63Hz/ 200 Amp/ Zero cross over
All input isolated, RS485 as per IEC 61000 STD.